Los Angeles Hardwood Flooring Installation Process | Glamour Flooring At this job site in Los Angeles we are installing a 5″ European natural oak hardwood floor. We had to remove the existing tile and then added bags of cement aka float to assure the floor was as flat as possible. To assure a well done hardwood flooring installation we must try to eliminate unevenness on the floor so the floors will make contact with the hardwood flooring glue and concrete. As we are installing we are using tape to make sure the flooring does not separate from the tongue in groove during floor installation while working on top of it. We have a flooring store in Woodland Hills with a large flooring selection to make your shopping experience fun and exciting. This is yet another project that Glamour Flooring just finished doing. We were responsible for tearing out some laminate and tile. Once we did the tear out, our installer recommended to float the floors because they were not leveled. After pouring the float and grinding down the cement, the floors were ready to have the Engineered wood floors installed. Here are some Before and after pictures of the project.